Canon imagePRESS 1135 Series Service Manual page 432

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Primary Charging Wire (right)
13) Put the charging wire through under the groove.
Groove
15) Cut the extra charging wire with a nipper.
16) Put the charging wire through under the groove, pick the leading edge of spring with tweezers and hook it onto the hook.
Caution :
Make sure to hook the
charging wire on the
indicated the groove
(grid side).
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Primary Charging Wire (right)
14) After hooking the charging wire on the charging wire positioning on the rear of the primary
charging assembly, hook the charging wire torsion spring on the charging wire in the below
position and twist it.
Charging wire
F-4-324
Hook
Spring
Groove
Charging wire
Charging wire positioning
Charging wire Charging wire torsion spring
(FRONT) (REAR)
Caution :
After hooking,
make sure that the
charging assembly
is neither folded nor
twisted.
F-4-326
4-168
F-4-325
4-168