Removing Pre-Primary Transfer Charging Wire Pad Holder - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Wire Pad Holder

Removing Pre-Primary Transfer Charging Wire Pad Holder

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Remove Pre-Primary Transfer Charging
Assembly.
(Refer to page 4-177)
2) Remove the 3 screws and the shield plate.
x3
Shield plate
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Wire Pad Holder
1) Turn the gear by hand and move the cleaning pad arm to the center.
Gear
F-4-351
Cleaning pad arm
Caution : Caution at installation
Be sure to push the pad holder of the pre-primary transfer charging wire until it is
locked with the claw.
Pad holder
Claw
4-178
F-4-350
F-4-352
4-178