Canon imagePRESS 1135 Series Service Manual page 470

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Photosensitive Drum Unit
4) Pull out the drum flange unit until it stops.
6) Hold the photosensitive drum unit and remove it in the upper direction.
Caution :
Be careful not to
touch the surface of
photosensitive drum.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Photosensitive Drum Unit
Drum flange unit
F-4-421
Photosensitive drum unit
F-4-423
5) Remove the paper on the photosensitive drum unit.
Paper
7) Place the paper on the photosensitive drum unit to block the light.
4-206
F-4-422
Paper
Photosensitive drum unit
F-4-424
4-206