Use Of New Connectors - Canon imagePRESS 1135 Series Service Manual

1
Product Overview > Service features > Use of new connectors > Features
■ Location Code
imagePRESS
1135 / 1135+
Device
/1125 / 1125+
/ 1110 /1110+ -
ARCNET option
imagePRESS 1135 / 1135+
00
/1125 / 1125+ / 1110 /1110+
Color Image Reader-L1
01
(Reader+DADF)
11
POD Deck-C1/
12(2nd)
Secondary POD Deck-C1
13(3rd)
Multi Drawer Document
21
Insertion Unit-A1
Professional Puncher-B1/
Professional Puncher 31
Integration Unit-A1
51
High Capacity Stacker-E1
52(2nd)
Perfect Binder-C1 61
Paper Folding Unit-F1 02
Finisher-AK1/
02
Saddle FinisherAK2
Booklet Trimmer-D1/ Two-
02
Knife Booklet Trimmer-A1
Document Insertion Unit-F1 71
Side Paper Deck-AF1
---
(Multi Drawer)
1 Product Overview > Service features > Use of new connectors > Features
DISPLAY>JAM
imagePRESS
DISPLAY>ERR
1110 /1110+ -
IPCoption
Main controller = 00
Printer engine = 05
←
01 or 04
←
---
---
02
---
---
Same the JAM
←
---
---
02
00
T-1-7

Use of new connectors

Some connectors on controller boards now use a new connector construction.
■ Purpose
The purpose of the new connector construction is to prevent communication errors as a result
of the following:
• Connectors loosening and disconnection due to vibrations during transportation.
• Poor connection of connectors during service.
■ Features
• Raised housing, making the connectors easier to pull out.
• Connectors require less force to be inserted.
• Lever lock construction. Correct insertion can be judged by an audible 'click' and physical
clicking sensation.
Cautions when inserting or removing connectors
Note the following points when carrying out service, etc.
Release the lock lever and then pull the housing to remove the connector. Do not pull on
the cables.
Insert the housing into the socket straight on. Do not insert the housing at an angle.
1-10
F-1-11
1-10