Canon imagePRESS 1135 Series Service Manual page 818

Detail
Code Location Item
Code
E5D0 8001 61 Title Error in sub grip up/down motor(M17) on P-binder
Description When the sub grip is lifted, the sub grip home position sensor
of detection (S37) does not come ON even though it is driven for the
specified time.
Measures 1. Replace the sub grip up/down motor (M17).
2. Replace the sub grip home position sensor (S37).
3. Replace the slave controller PCB.
E5D0 8002 61 Title Error in sub grip up/down motor(M17) on P-binder
Description When the sub grip is lowered, the sub grip home position
of detection sensor (S37) does not go OFF even though it is driven for the
specified time.
Measures 1. Replace the sub grip up/down motor (M17).
2. Replace the sub grip home position sensor (S37).
3. Replace the slave controller PCB.
E5D1 8001 61 Title Error in size shift motor (M19) on P-binder
Description When the sub grip opens in the side direction, the size shift
of detection home position sensor (S38) does not come ON even though
it is driven for the specified time.
Measures 1. Replace the size shift motor (M19).
2. Replace the size shift home position sensor (S38).
3. Replace the slave controller PCB.
E5D1 8002 61 Title Error in size shift motor (M19) on P-binder
Description When the sub grip closes in the side direction, the size shift
of detection home position sensor (S38) does not go OFF even though it
is driven for the specified time.
Measures 1. Replace the size shift motor (M19).
2. Replace the size shift home position sensor (S38).
3. Replace the slave controller PCB.
E5D2 0005 61 Title Error in sub grip motor(M20) on P-binder
Description The sub grip open sensor (S40) and the sub grip close
of detection sensor (S41) come ON simultaneously.
Measures 1. Replace the sub grip motor (M20).
2. Replace the sub grip close sensor (S41).
3. Replace the sub grip open sensor (S40).
4. Replace the slave controller PCB.
E5D2 8001 61 Title Error in sub grip motor(M20) on P-binder
Description When the sub grip opens, the sub grip open sensor (S40)
of detection does not come ON even though it is driven for the specified
time.
Measures 1. Replace the sub grip motor (M20).
2. Replace the sub grip open sensor (S40).
3. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5D2 8002 61 Title Error in sub grip motor(M20) on P-binder
Description When the sub grip closes, the sub grip open sensor (S40)
of detection does not go OFF even though it is driven for the specified
time.
Measures 1. Replace the sub grip motor (M20).
2. Replace the sub grip open sensor (S40).
3. Replace the slave controller PCB.
E5D2 8003 61 Title Error in sub grip motor(M20) on P-binder
Description When the sub grip closes, the sub grip close sensor (S41)
of detection does not come ON even though it is driven for the specified
time.
Measures 1. Replace the sub grip motor (M20).
2. Replace the sub grip close sensor (S41).
3. Replace the slave controller PCB.
E5D2 8004 61 Title Error in sub grip motor(M20) on P-binder
Description When the sub grip opens, the sub grip close sensor (S41)
of detection does not go OFF even though it is driven for the specified
time.
Measures 1. Replace the sub grip motor (M20).
2. Replace the sub grip close sensor (S41).
3. Replace the slave controller PCB.
E5D3 0001 61 Title Error in paper stack shift motor (M18) on P-binder
Description When the sub grip moves to the home position, the paper
of detection stack shift home position sensor (S34) does not come ON
even though it is driven for the specified time.
Measures 1. Replace the paper stack shift motor (M18).
2. Replace the paper stack shift home position sensor (S34).
3. Replace the slave controller PCB.
E5D3 0002 61 Title Error in paper stack shift motor (M18) on P-binder
Description When the sub grip shifts the paper stack, the paper stack shift
of detection home position sensor (S34) does not go OFF even though it
is driven for the specified time.
Measures 1. Replace the paper stack shift motor (M18).
2. Replace the paper stack shift home position sensor (S34).
3. Replace the slave controller PCB.
E5D3 0003 61 Title Error in paper stack shift motor (M18) on P-binder
Description 1. When the sub grip shifts the paper stack, the paper stack
of detection shift main grip position sensor (S35) does not come ON
even though it is driven for the specified time.
2. When the sub grip shifts the paper stack, the main grip is
still grapping the paper stack on the rotation home position.
Measures 1. Remove the paper stack stationary on main gripper area.
2. Replace the paper stack shift motor (M18).
3. Replace the paper stack shift main grip position sensor
(S35).
4. Replace the slave controller PCB.
7-86
Description
7-86