Canon imagePRESS 1135 Series Service Manual page 489

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > ITB Secondary Transfer Inlet Upper Guide
Caution :
Be careful not to damage the ITB.
Caution : Caution during
installation
Insert the Positioning Bosses
of the Secondary Transfer Inlet
Guide into the hole of the ITB Unit,
match the bearing of the ITB Unit
to the hole and tighten and secure
the Secondary Transfer Inlet
Guide with a screw.
Caution :
Be careful not to fold the sheet at cleaning.
Sheet
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > ITB Secondary Transfer Inlet Upper Guide
Positioning boss
Holes on the ITB unit
F-4-471
Pre-secondary
transfer guide
5) Clean the sheet of the ITB secondary transfer inlet upper guide with lint-free paper moistened
with alcohol.
Sheet
4-225
Screw
Hole
Bearing
F-4-470
F-4-472
4-225