Canon imagePRESS 1135 Series Service Manual page 964

■ ACC-STS
COPIER> DISPLAY> ACC-STS
FEEDER Dspl of DADF connection status
Lv.1 Details Displaying connecting status of DADF.
Use case When checking connection between the host machine and DADF.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: no connection, 1: connected (active)
SORTER Conect status of finisher-related option
Lv.1 Details Displaying the connecting status of finisher-related options.
Use case When checking the connection of finisher-related options.
Adj/set/operate method N/A (display only)
Display/adjust/set range Left column (connection status of finisher-related options): 1 to 5
1: Without saddle
2: With saddle, without folding unit
3: With saddle and inserter, without folding unit
4: With saddle and folding unit, without inserter
5: With sadddle, inserter and folding unit
Right column (connection status of finisher-delonged punch unit):
0 to 4
0: No, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
DECK Dspl of connection status of paper deck.
Lv.1 Details Displaying connecting status of the paper deck.
Use case When checking connection between the host machine and the paper
decks.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 8
0: No connection
1: Connected (small) (hidden display with this equipment)
2: Connected (large)
3: POD Deck Lite (multi insertion/manual feed is available)
4: POD Deck Lite (No multi insertion/manual feed)
5: Multi insertion/manual feed only
6: POD deck
7: 2-POD deck connected
8: 3-POD deck connected (display hidden with this equipment)
CARD Dspl of connection status of card reader
Lv.1 Details Displaying connecting status of the card reader.
Use case When checking connection between the host machine and the card
reader.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: No card is inserted while the card reader is connected (copy is not
available)
1: Card reader is not connected, or the card reader is inserted while
the card reader is connected (copy is available)
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > ACC-STS
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > ACC-STS
COPIER> DISPLAY> ACC-STS
DATA-CON Dspl of NE Controller connection state
Lv.1 Details To display the connecting state of the NE Controller.
Display/adjust/set range 0 to 1
0: Not connected, 1: Connected
RAM Dspl of memory capacity of main con PCB
Lv.1 Details Displaying memory capacity on the main controller PCB.
Use case When checking memory capacity of the host machine.
Adj/set/operate method N/A (display only)
Unit MB
Default value 512
COINROBO Dspl of connection status of coin manager
Lv.1 Details Displaying connecting status of the coin manager.
Use case When checking connection between the host machine and the coin
manager.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: No connection, 1: Connected
NIB Dspl of connection status of network PCB
Lv.1 Details Displaying connecting status of the network PCB.
Use case When checking connection between the host machine and the
network PCB.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 3
0: No connection, 1: Ethernet PCB connection, 2: Token ring PCB
connection, 3: Ethernet PCB + Token ring PCB connection
PS/PCL Dspl of instal status of PS/PCL firmware
Lv.1 Details Displaying installation status of PS/PCL firmware.
Use case When checking whether it is installed to the host machine.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 2
0: Not installed, 1: PS/PCL, 2: PS Kanji
RIP1 Dspl of connection status of RIP1
Lv.1 Details Displaying connecting status of RIP1.
Use case When checking the connection status between the host machine and
RIP1.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: No connection, 1: Connected
NETWARE Installation status of netware firmware
Lv.1 Details Displaying installation status of the network firmware.
Use case When checking whether it is installed to the host machine.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: Not installed, 1: Installed
8-21
8-21