Making Initial Checks
List of Initial Check Items
Item
Site Environment
Checking the Paper
Checking the Placement of Paper
Checking the Durables
Checking the Periodically Replaced Parts
6
Troubleshooting > Making Initial Checks > List of Initial Check Items
No.
1
The voltage of the power supply is as rated (±10%).
The site is not a high temperature / humidity environment (near a water faucet, water boiler, humidifier), and it is not in a cold
2
place. The machine is not near a source of fire or dust.
3
The site is not subject to ammonium gas.
4
The site is not exposed to direct rays of the sun. (Otherwise, provide curtains.)
5
The site is well ventilated, and the floor keeps the machine level.
6
The machine's power plug remains connected to the power outlet.
7
The paper is of a recommended type.
8
The paper is not moist. Try paper fresh out of package.
9
Check the cassette and the manual feed tray to see if the paper is not in excess of a specific level.
10
If a transparency is used, check to make sure that it is placed in the correct orientation in the manual feed tray.
11
Check the table of durables to see if any has reached the end of its life.
Check the scheduled servicing table and the periodically replaced parts table, and replace any part that has reached the time
12
of replacement.
6
Troubleshooting > Making Initial Checks > List of Initial Check Items
Detail
6-2
Check
T-6-1
6-2