Removing Pressure Roller Bearing; Removing Pressure Roller Insulating Bush - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pressure Roller Insulating Bush

Removing Pressure Roller Bearing

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Pressure Roller Unit.
(Refer to page 4-116)

Removing Pressure Roller Insulating Bush

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Pressure Roller Unit.
(Refer to page 4-116)
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pressure Roller Insulating Bush
1) Remove the 2 pressure roller bearings from the pressure roller.
Pressure roller bearings
1) Remove the 2 pressure roller bearings and remove the 2 pressure roller insulating bushes from
the pressure roller.
w
Pressure roller insulating bush
Pressure roller bearing
Pressure roller bearings
F-4-634
Pressure roller bearing
Pressure roller insulating bush
F-4-635
4-286
4-286