Canon imagePRESS 1135 Series Service Manual page 382

4
Parts Replacement and Cleaning > Main Unit > Removing Pressure Roller Unit
Caution :
Be careful not to touch the glass surface of pressure heater.
8) While turning the gear, clean the surface of the fixing refresh roller with lint-free paper moistened with alcohol.
Caution :
Be careful not to strongly push the lint-free
paper on the surface of the fixing refresh
roller.
The surface of the fixing refresh roller may
come off.
4 Parts Replacement and Cleaning > Main Unit > Removing Pressure Roller Unit
6) Hold the edge of pressure heater and remove
the pressure heater from the pressure roller.
Pressure heater
F-4-186
7) Fold the paper and place it under the fixing inlet guide, and then clean the fixing
inlet guide with lint-free paper moistened with alcohol.
Paper
F-4-187
Refresh roller
Gear
F-4-189
4-118
Inlet guide
F-4-188
4-118