Removing Fixing Roller Sub Thermistor - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Fixing Roller Sub Thermistor

Removing Fixing Roller Sub Thermistor

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Fixing Roller Unit.
(Refer to page 4-110)
6) Caution about the thermistor/thermo switch.
(Refer to page 4-97)
3) Remove the fixing sub thermistor from the fixing sub thermistor unit.
Fixing sub thermistor
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Fixing Roller Sub Thermistor
1) Remove the harness from the wire saddle and remove the connector.
2) Remove the fixing sub thermistor unit in the direction of the arrow.
Wire saddle
F-4-631
Fixing sub thermistor unit
Connector
4-284
F-4-630
4-284