Canon imagePRESS 1135 Series Service Manual page 488

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > ITB Secondary Transfer Inlet Upper Guide
2) Keep the ITB unit open by 90 degree and fit the edge without groove of the support shaft to the hole of the ITB unit frame while the groove on the
other side of the support shaft to the groove of the ITB unit frame and install it.
3) Close the ITB unit and it stands by the support of the support shaft.
Groove on
support shaft
Groove of intermediate
transfer belt unit frame
4) Loosen the screw and remove the ITB secondary transfer inlet upper guide.
Pre-secondary
transfer guide
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > ITB Secondary Transfer Inlet Upper Guide
Intermediate
transfer belt unit
Hole of
intermediate
transfer belt
unit frame
Support shaft
Support shaft
Screw
F-4-469
F-4-468
4-224
4-224