Canon imagePRESS 1135 Series Service Manual page 417

4
Parts Replacement and Cleaning > Main Unit > Removing the Deck Lifter Motor Unit
2) Remove the 9 wire saddles and the 3 connectors.
x3
x9
4) Remove the sensor support plate.
• 1 screw
4 Parts Replacement and Cleaning > Main Unit > Removing the Deck Lifter Motor Unit
Connector
Connector
F-4-282
Sensor support plate
F-4-284
3) Remove the switch support plate.
• 2 screws
x2
5) Remove the gear cover.
• 1 screw
Switch support plate
F-4-283
Gear cover
F-4-285
4-153
4-153