Removing Fixing Roller Thermo Switch; Removing Pressure Roller - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pressure Roller

Removing Fixing Roller Thermo Switch

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Fixing Roller Unit.
(Refer to page 4-110)
6) Caution about the thermistor/thermo switch.
(Refer to page 4-97)

Removing Pressure Roller

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Pressure Roller Unit.
(Refer to page 4-116)
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pressure Roller
1) Remove the 2 screws and the washer from the 2 terminals.
2) Move the release lever until it stops and remove the fixing roller thermo switch.
1) Remove the 2 pressure roller bearings ,2 pressure roller insulating bushes,2 screws and 1gear from the pressure roller.
Pressure roller insulating bushe
Pressure roller bearing
x2
Release lever Fixing roller thermo switch
Pressure roller bearing
Pressure roller insulating bushe
Gear
Pressure roller
Washer
F-4-632
x2
F-4-633
4-285
4-285