Canon imagePRESS 1135 Series Service Manual page 799

Detail
Code Location Item
Code
E590 8001 02 Title a. Error in punch operation (Fin-AK)
b. Error in the Punch motor (Fin-AG)
Description a. If the punch motor HP sensor (PS36) cannot be detected
of detection within 200 msec after the punch motor starts driving.
b. The punch HP sensor does not detect the puncher.
Measures a-1. Check the punch motor.
a-2. Check the punch motor clock sensor (SR38).
a-3. Replace the punch unit.
a-4. Replace the finisher controller PCB.
b-1. Check the connector of the punch HP sensor (S104) and
the punch motor clock sensor (S105).
b-2. Replace the punch HP sensor (S104).
b-3. Replace the punch motor clock sensor (S105).
b-4. Check the connector of the punch motor (M102), and
replace the motor if necessary.
b-5. Replace the puncher driver PCB (PCB1).
b-6. Replace the finisher controller PCB.
E590 8002 02 Title a. Error in punch operation (Fin-AK)
b. Error in the Punch motor (Fin-AG)
Description a. If the punch motor HP sensor (PS36) is still detected after
of detection 200 msec from the start of punch motor driving.
b. The puncher does not come off the punch HP sensor.
Measures a-1. Check the punch motor.
a-2. Check the punch motor clock sensor (SR38).
a-3. Replace the punch unit.
a-4. Replace the finisher controller PCB.
b-1. Check the connector of the punch HP sensor (S104) and
the punch motor clock sensor (S105).
b-2. Replace the punch HP sensor (S104).
b-3. Replace the punch motor clock sensor (S105).
b-4. Check the connector of the punch motor (M102), and
replace the motor if necessary.
b-5. Replace the puncher driver PCB (PCB1).
b-6. Replace the finisher controller PCB.
E590 8003 02 Title Error in the Punch motor
Description The punch motor lock abnormal is detected.
of detection
Measures 1. Check the connector of the punch HP sensor (S104) and
the punch motor clock sensor (S105).
2. Replace the punch HP sensor (S104).
3. Replace the punch motor clock sensor (S105).
4. Check the connector of the punch motor (M102), and
replace the motor if necessary.
5. Replace the puncher driver PCB (PCB1).
6. Replace the finisher controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E590 8004 02 Title Error in punch operation
Description If the punch motor HP sensor (PS36) cannot be detected at
of detection the operation switch of 2/hole/3-hole, 2-hole/4-hole (France).
Measures 1. Check the punch motor.
2. Check the punch motor clock sensor (SR38).
3. Replace the punch unit.
4. Replace the finisher controller PCB.
E593 8001 02 Title Error in the punch slide motor
Description The punch unit does not come off the horizontal registration
of detection HP sensor.
Measures 1. Check the connector of the horizontal registration HP
sensor (S101), and replace the sensor if necessary.
2. Check the connector of the punch slide motor (M101), and
replace the motor if necessary.
3. Replace the puncher driver PCB (PCB1).
4. Replace the finisher controller PCB.
E593 8002 02 Title Error in the punch slide motor
Description The horizontal registration HP sensor does not detect the
of detection punch unit.
Measures 1. Check the connector of the horizontal registration HP
sensor (S101), and replace the sensor if necessary.
2. Check the connector of the punch slide motor (M101), and
replace the motor if necessary.
3. Replace the puncher driver PCB (PCB1).
4. Replace the finisher controller PCB.
E5A1 8081 61 Title Error in the grip motor (M43) of the perfect binder.
Description If the grip home position sensor (S93) is not OFF within some
of detection specified time during grip movement.
Measures 1. Replace the grip motor (M43).
2. Replace the grip home position sensor (S93).
3. Replace the slave controller PCB.
E5A1 8082 61 Title Error in the grip motor (M43) of the perfect binder.
Description If the grip home position sensor (S93) is not ON within some
of detection specified time during grip movement
Measures 1. Replace the grip motor (M43).
2. Replace the grip home position sensor (S93).
3. Replace the slave controller PCB.
E5A1 8083 61 Title Error in the grip motor (M43) of the perfect binder.
Description If the grip end sensor (S94) is not ON within some specified
of detection time during grip movement.
Measures 1. Replace the grip motor (M43).
2. Replace the grip end sensor (S94).
3. Replace the slave controller PCB.
7-67
Description
7-67