Canon imagePRESS 1135 Series Service Manual page 724

■ Downloading Procedure
CAUTION :
• The file SramImg.bin, MeapBack or SramRCON may only be downloaded to their
source machine.
• The point to keep in mind of the Inbox: Before replacing the Main Controller PCB 2,
back up Sraming.bin using SST. After replacing the Main Controller PCB 2, be sure
to start the machine with the 2 and 8 keys in safe mode, and restore Sraming.bin
using SST. If the machine is started normally without restoring Sraming.bin at the
first startup, a mismatch occurs between the Inbox management information in the
SRAM of the Main Controller PCB 2 and the Inbox data in the HDD. In that case,
the documents in the Inbox are lost and cannot be opened.
• The machine must be in safe mode for downloading the file MeapBack.
• The machine must be in normal mode for downloading the file SramRCON.
Here is the MeapBack download procedure as an example.
1) Start the machine in safe mode. (While pressing 2 + 8, turn ON the main power switch.)
2) Start up the SST.
3) Select the model and the type of system software ('Single') ; then, check the network
settings, and click [START].
Service Support Tool DLM0 (Ver. X.XX E)
Interface
Network
IP Address
172.16.1.100
Register Remove
Target Selection CONTROL
Select the target.
Click a button to execute.
MFP
CONNECT
MFP
R egi s t er Fi rm war e
USB
D el et e Fi rm war e
Del ete B a c k up Dat a
USB S y s te m Ma nag emen t
c:
START
S tar t A s s i s t Mo de
EXIT
6
Troubleshooting > Version Upgrade > Uploading and Downloading Backup Data > Downloading Procedure
Export Firm Selection
Click the interface and click the [START]
button.
Select the model
iPR1135
iPR1135
ALL
Type of system software
Single
6 Troubleshooting > Version Upgrade > Uploading and Downloading Backup Data > Downloading Procedure
4) Click [Download Data].
ServiceSupportTool DLM10 (Ver. X.XX E)
SelectableFirmware
Select the firmware to be downloaded,
then click the [Start] button.
SelectableFirmware
iPR1135
ASR
BROWSER
DCON
HELP
LANGUAGE
MEAPCONT
MEDIA
RCON
RUI
SYSTEM
TTS
WebDAV
iRZZZZ
KEY
SDICT
5) Select the data to download, and click [Start].
ServiceSupportTool DLM10 (Ver. X.XX E)
FileSave
Select the file to be downloaded, then
click the [Start] button.
c:
MeapBack.bin.upd
SramRCON.bin.upd
Series : iPR1135
Serial No : F6310130
DataType :
backup of meap
Date :
2008/12/15 17:36:49
Memo : Memo
6) When downloading has ended, click [OK] to return to the previous screen.
F-6-94
172.16.1.100
iPR1135
SAFE
C l e a r
Control
Click the button of the task to be
iPR1135
executed. SYSTEM
Hold
USenXXXXM
Backup
USenXXXXW
Download Firmware
RUI
XXenXXXX
MEAPCONT
Upload Data
XXxxXXXX
LANGUAGE
XXenXXXX
Download Data
XXjaXXXX
SDICT
Restore Backup System XXjaXXXX
Format HDD
Start
Shutdown
Return to Main Menu
F-6-95
172.16.1.100
iPR1135
SAFE
C l e a r
SelectableDate
Control
Click the button of the task to be
executed.
Download Firmware
Upload Data
Download Data
Restore Backup System
Format HDD
Start
Cancel
Return to Main Menu
F-6-96
6-57
6-57