Removing Pre Exposure Led (1) - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Main Unit > Removing Pre Exposure LED (1)

Removing Pre Exposure LED (1)

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Remove Process Unit Cover.
(Refer to page 4-71)
3) Remove Primary Charging Assembly.
(Refer to page 4-158)
4) Pull Out Process Unit.
(Refer to page 4-72)
3) Place the paper on the photosensitive drum.
Caution :
Be careful not
to expose the
photosensitive drum
to the direct light.
4 Parts Replacement and Cleaning > Main Unit > Removing Pre Exposure LED (1)
1) Remove the 2 screws, hold the grip and open the process unit upper lid.
2) Turn the lock lever in the direction of the arrow to lock the process unit upper lid.
x2
F-4-71
Process unit upper lid
4-68
Lock lever
F-4-70
4-68