Removing Registration Duplex Driver Pcb - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > PCB > Removing Registration Duplex Driver PCB

Removing Registration Duplex Driver PCB

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Remove Registration Unit.
(Refer to page 4-91)
2) Remove the registration duplex driver PCB.
• 5 screws
• 1 PCB support
x5
4 Parts Replacement and Cleaning > PCB > Removing Registration Duplex Driver PCB
1) Remove the connectors on the PCB.
• 26 connectors
x26
PCB support
F-4-863
4-379
F-4-862
4-379