Pre-Fixing Feed Area - Canon imagePRESS 1135 Series Service Manual

2
Technology > Pickup / Feed System > Pre-fixing feed Area > Pre-fixing feeding assembly lifter control

Pre-fixing feed Area

■ Pre-fixing feeding assembly lifter control
Pre-fixing feeding assembly performs the lifting, and the path is changed according to the
paper size.
Paper with feed direction less than 227.3 mm : upper path
Paper 227.3 mm or more with feed direction : lower path
Upper path
PS63
Registration/duplexing driver PCB
2 Technology > Pickup / Feed System > Pre-fixing feed Area > Pre-fixing feeding assembly lifter control
M29
ON
PCB4
F-2-174
Lower path
PS63
Registration/duplexing driver PCB
MEMO :
Since the loop control is executed for the paper 227.3 mm or more with feed direction,
lower path is used to enable the paper loop.
Since the loop control is not executed for the paper with feed direction less than 227.3
mm, thus, the upper path, the supreme straight path form is used for the feeding.
2-125
M29
PCB4
F-2-175
2-125