Escape Area Control/Function - Canon imagePRESS 1135 Series Service Manual

2
Technology > Pickup / Feed System > Escape Area Control/Function > Escape Delivery Control

Escape Area Control/Function

■ Escape Delivery Control
This machine is equipped with the escape path on the main body and the paper is fed
through the escape path and delivered to the escape tray above the pickup options (POD
deck or Side Paper Deck) in the following cases.
<When double feed occurs>
When the double feed is detected at each area (main body deck path, pickup option), affected
paper is delivered to the escape tray.
1) Double feed is detected.
2) The paper that is ahead of the affected paper is delivered normally.
3) Escape switch solenoid (SL3) is turned ON and affected paper is delivered to the escape
tray.
4) The job suspended due to double feed restarts.
<When JAM occurs>
When JAM occurs later than the escape path, in-body residual paper on upstream is
delivered to the escape tray.
<Paper absence in mixed mode print>
When one of the paper types runs out in mixed print, paper that is printed already is delivered
to the escape tray.
2 Technology > Pickup / Feed System > Escape Area Control/Function > Escape Delivery Control
PCB3 Pickup feed driver PCB
PCB1
DC controller PCB
M
M17
PS171
Escape delivery sensor
PS28
SL3
PCB32
Double feed detection
PCB (transmission)
PS119
PS120
PCB33
Double feed detection
PCB (reception)
M17 Escape feed motor
SL3 Escape switch solenoid
PS28 Escape path sensor
PS119 Double feed sensor (transmission)
PS120 Double feed sensor (reception)
PS171 Escape path sensor 2
2-135
Escape delivery motor
F-2-191
2-135