Canon imagePRESS 1135 Series Service Manual page 759

Detail
Code Location Item
Code
E280 0101 04 Title Error in the communication between Reader Controller PCB
(PCB1) - Scanner Unit (DADF)
Description During communication in the Reader Controller PCB (PCB1)-
of detection Scanner Unit (DADF) open communication is not executed
within specified time.
Measures 1. Check the connector of the scanner unit (DADF).
2. Check the connector of the reader controller PCB (PCB1).
3. Replace the scanner unit (DADF).
4. Replace the reader controller PCB (PCB1).
E302 0001 04 Title Abnormality in the surface shading
Description Abnormality in the shading RAM access, value shading is
of detection below or above the specification.
Measures 1. Check the connector of the scanner unit (reader).
2. Check the connector of the reader controller PCB (PCB1).
3. Replace the scanner unit (reader).
4. Replace the reader controller PCB (PCB1).
E302 0101 01 Title Abnormality in the back side shading
Description Abnormality in the shading RAM access, value shading is
of detection below or above the specification.
Measures 1. Check the connector of the scanner unit (DADF).
2. Check the connector of the reader controller PCB (PCB1).
3. Replace the scanner unit (DADF).
4. Replace the reader controller PCB (PCB1).
E302 0101 04 Title Error in back-side shading
Description Access error in shading RAM, shading value is below or over
of detection the specified level.
Measures 1. Check the connector of the scanner unit (DADF).
2. Check the connector of the reader controller PCB (PCB1).
3. Replace the scanner unit (DADF).
4. Replace the reader controller PCB (PCB1).
E315 0007 00 Title Error in JBIG encode
Description JBIG encode error
of detection
Measures 1. Turn OFF/ON.
2. Replace the main controller PCB.
E315 000D 00 Title Error in JBIG decode
Description JBIG decode error
of detection
Measures 1. Turn OFF/ON.
2. Replace the main controller PCB.
E315 000E 00 Title Error at software decode
Description JBIG decode error
of detection
Measures Replace the main controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E315 0025 00 Title Error in ROTU hardware
Description ROTU hardware error
of detection
Measures 1. Replace the SDRAM.
2. Replace the HDD.
3. Replace the main controller PCB.
E315 0027 00 Title Error in ROTU timeout
Description ROTU timeout error
of detection
Measures 1. Replace the SDRAM.
2. Replace the HDD.
3. Replace the main controller PCB.
E315 0033 00 Title Error in MemFill hardware
Description MemFill hardware error
of detection
Measures Replace the main controller PCB.
E315 0035 00 Title Error in MemFill timeout
Description MemFill timeout error
of detection
Measures Replace the main controller PCB.
E315 0100 00 Title Error in PrcOverRun
Description PrcOverRun error
of detection
Measures Replace the main controller PCB.
E315 0500 00 Title Error in device timeout
Description If interruption does not occur within 2 min from start-up.
of detection
Measures 1. DDI-S (Check RCON and I/F)
2. Replace the main controller PCB.
E315 0501 00 Title Error in device abnormal termination
Description When an abnormal interruption is detected after startup.
of detection
Measures 1. DDI-S (Check RCON and I/F)
2. Replace the main controller PCB.
E315 0510 00 Title Error in device timeout
Description If interruption does not occur within 2 min from start-up.
of detection
Measures 1. DDI-S (Check RCON and I/F)
2. Replace the main controller PCB.
E315 0511 00 Title Error in device abnormal termination
Description When an abnormal interruption is detected after startup.
of detection
Measures 1. DDI-S (Check RCON and I/F)
2. Replace the main controller PCB.
7-27
Description
7-27