Canon imagePRESS 1135 Series Service Manual page 786

Detail
Code Location Item
Code
E567 8001 51 Title Error in lock of side registration shift motor (M7) of the stacker
Description Side registration shift HP sensor (S6) failed to be OFF even
of detection though specified period of time has passed in the case of
initial operation to shift from HP to the standby position for
each paper
Measures 1. Check the connector of the side registration shift HP
sensor (S6), and replace the sensor if necessary.
2. Replace the side registration shift motor (M7).
3. Replace the master controller PCB.
E567 8001 52 Title Error in lock of side registration shift motor (M7) of the 2nd
stacker
Description Side registration shift HP sensor (S6) failed to be OFF even
of detection though specified period of time has passed in the case of
initial operation to shift from HP to the standby position for
each paper
Measures 1. Check the connector of the side registration shift HP
sensor (S6), and replace the sensor if necessary.
2. Replace the side registration shift motor (M7).
3. Replace the master controller PCB.
E567 8002 02 Title Error in shift roller operation
Description Shift roller unit HP sensor does not go OFF within 5 sec after
of detection the side registration shift motor starts operation.
Measures 1. Check the connector of the side registration shift motor and
the shift roller unit HP sensor, and replace the motor/the
sensor if necessary.
2. Replace the finisher controller PCB.
E567 8002 51 Title Error in lock of side registration shift motor (M7) of the stacker
Description Side registration shift HP sensor (S6) failed to be ON even
of detection though specified period of time has passed in the case of
initial nip/nip-release operation.
Measures 1. Check the connector of the side registration shift HP
sensor (S6), and replace the sensor if necessary.
2. Replace the side registration shift motor (M7).
3. Replace the master controller PCB.
E567 8002 52 Title Error in lock of side registration shift motor (M7) of the 2nd
stacker
Description Side registration shift HP sensor (S6) failed to be ON even
of detection though specified period of time has passed in the case of
initial nip/nip-release operation
Measures 1. Check the connector of the side registration shift HP
sensor (S6), and replace the sensor if necessary.
2. Replace the side registration shift motor (M7).
3. Replace the master controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E568 8001 02 Title a. Error in feed roller disengage operation (Fin-AK)
b. Error in the feed roller disengage/buffer flapper motor (Fin-
AG)
Description a. Feed roller HP sensor does not come ON within 5 sec after
of detection the feed roller disengage motor starts operation.
b. The disengage roller does not come off the feed roller
separation HP sensor.
Measures a-1. Check the connector of the feed roller disengage motor
and the feed roller HP sensor, and replace the motor/the
sensor if necessary.
a-2. Replace the finisher controller PCB.
b-1. Check the connector of the feed roller separation HP
sensor (S111), and replace the sensor if necessary.
b-2. Check the connector of the feed roller disengage/buffer
flapper motor (M119), and replace the motor if necessary.
b-3. Replace the finisher controller PCB.
E568 8002 02 Title a. Error in feed roller disengage operation (Fin-AK)
b. Error in the feed roller disengage/buffer flapper motor (Fin-
AG)
Description a. Feed roller HP sensor does not go OFF within 5 sec after
of detection the feed roller disengage motor starts operation.
b. The feed roller separation HP sensor does not detect the
disengage roller.
Measures a-1. Check the connector of the feed roller disengage motor
and the feed roller HP sensor, and replace the motor/the
sensor if necessary.
a-2. Replace the finisher controller PCB.
b-1. Check the connector of the feed roller separation HP
sensor (S111), and replace the sensor if necessary.
b-2. Check the connector of the feed roller disengage/buffer
flapper motor (M119), and replace the motor if necessary.
b-3. Replace the finisher controller PCB.
E568 8003 02 Title Error in the feed roller disengage/buffer flapper motor
Description The buffer flapper does not come off the buffer flapper HP
of detection sensor.
Measures 1. Check the connector of the buffer flapper HP sensor (S142),
and replace the sensor if necessary.
2. Check the connector of the feed roller disengage/buffer
flapper motor (M119), and replace the motor if necessary.
3. Replace the finisher controller PCB.
7-54
Description
7-54