Removing Primary Transfer Roller - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Transfer Roller

Removing Primary Transfer Roller

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Remove Process Unit Cover.
(Refer to page 4-71)
3) Pull Out ITB Unit.
(Refer to page 4-83)
4) Remove ITB Cleaning Unit.
(Refer to page 4-227)
5) Remove Patch Sensor Unit.
(Refer to page 4-88)
6) Remove ITB.
(Refer to page 4-219)
2) Hold the ITB lever and store the support shaft.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Transfer Roller
1) Hold the ITB lever and remove the support shaft that supports ITB.
Support shaft
F-4-446
F-4-445
3) Put back the ITB unit.
4-214
F-4-447
4-214