Cleaning Procedure During Itb Replacement - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Cleaning Procedure During ITB Replacement

Cleaning Procedure During ITB Replacement

<Preparation>
1) Open the Front Left Cover and the Front Right Cover.
(Refer to page 4-54)
2) Remove Process Unit Cover.
(Refer to page 4-71)
3) Pull Out ITB Unit.
(Refer to page 4-83)
4) Remove ITB Cleaning Unit.
(Refer to page 4-227)
5) Remove Patch Sensor Unit.
(Refer to page 4-88)
6) Remove ITB.
(Refer to page 4-219)
Caution : After removing this part, be sure to perform the "operation
after replacing the ITB".
Caution : After going through this procedure, be sure to perform the
"operation after cleaning the patch sensor.
2) Turn the ITB driven roller and clean it with the lint-free paper moistened with alcohol in vertical
direction.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Cleaning Procedure During ITB Replacement
1) Turn the steering roller and clean it with the lint-free paper moistened with alcohol in vertical
direction.
3) Clean the ITB drive scraper unit with the lint-free paper moistened with alcohol in vertical
direction.
ITB driven roller
F-4-502
Steering roller
F-4-501
ITB driven roller
F-4-503
4-237
4-237