Canon imagePRESS 1135 Series Service Manual page 196

2
Technology > MEAP > Setting the method to login to SMS > Setting for login by RLS Authentication
■ Setting for login by RLS Authentication
The procedures for changing the RLS authentication Start/ Stop settings are as follows.
1) In order to make a setting for Login by RLS Authentication, you need to Login by Password
Authentication.
URL: http://<IP address of MEAP device>:8000/sms/rls/
Ex.) http://172.16.188.240:8000/sms/rls
Login screen by Password Authentication
2 Technology > MEAP > Setting the method to login to SMS > Setting for login by RLS Authentication
2) Select [System Management] tab > [Utility] tab > [Application Management Function] tab.
3) Enter a check mark against the SMS Installer Service (Remote Login Service
Authentication) radio button and click on either Start or Stop. Check that the status has
changed accordingly.
F-2-211
2-148
F-2-212
F-2-213
2-148