Removing The Deck Lifter Motor Unit - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Main Unit > Removing the Deck Lifter Motor Unit

Removing the Deck Lifter Motor Unit

<Preparation>
1) Pull out Waste Toner Case Unit.
(Refer to page 4-56)
2) Pull out Paper Deck
(Refer to page 4-148)
3) Remove Paper Deck
(Refer to page 4-149)
MEMO :
If the paper is loaded on the deck,
remove the paper.
4 Parts Replacement and Cleaning > Main Unit > Removing the Deck Lifter Motor Unit
Caution :
When replacing the deck
lifter motor unit, purchase
the 8 WT2-5737 [A] and the
WT2-5677 [B] separately
and install them to the new
deck lifter motor unit.
1) Put the screwdriver into the hole of the liter drive shaft and fix the tension of the lifter wire.
Lifter wire
F-4-280
Liter drive shaft
F-4-281
4-152
4-152