Installing And Running - INVT DA180-S2R8SG0 Operation Manual

DA180 series basic AC servo drive Communication

8.4.5 Installing and running

To download INVT ServoPlorer V4.0, visit www.invt.com, choose Service and Support > Data
Download, and enter keywords for search. During the installing, the installer automatically checks
whether plug-ins need to be installed on your computer and displays messages. Before using
ServoPlorer, ensure the software and hardware configuration on your computer meets the
requirements in 8.4.2 "Hardware" and 8.4.3 "Software".
The USB driver program is located under the software installation directory (relative
path: ...\ServoPlorer\Drive\USB drive\). If the driver program needs to be installed manually, perform
the following steps:
1. Double click My computer, choose Hardware device manager > Update drive program, locate
the directory for storing the program, and run the file as highlighted in red in the following figure.
To start ServoPlorer, double click ServoPlorer.exe in the installation directory, as shown in the
following figure:
The following interface is displayed:
-255-