Alarm Clearing - INVT DA180-S2R8SG0 Operation Manual

DA180 series basic AC servo drive Operating and running

5.2.7 Alarm clearing

For the fault alarms that can be cleared online, if there no are fault trigger conditions, the fault alarms
can be cleared by short connecting the digital input fault clearing terminal (that is, parameters P3.00–
P3.07 are set to 0x004 or 0x104) to COM-. If the servo still has enabling command input, the drive
cannot clear the faults automatically.
You can power off and repower on the drive to clear the fault alarms that cannot be cleared online.
-73-