INVT DA180-S2R8SG0 Operation Manual page 11

DA180 series basic AC servo drive Overview
DA180 series servo drive (100W–1kW)
Specification Description
4: Torque limit signal
Such as protection against overvoltage, undervoltage,
For hardware overcurrent, overspeed, overload, overheating, encoder
fault, and power outage detection.
Protection Such as protection against ROM fault, initialization fault, I/O
For software
distribution exception, and excessive position deviation.
1: Ten faults can be recorded.
Fault recording
2: Key parameters can be recorded when a fault occurs.
Working temperature 0–45° C
Storage temperature -20–80° C (no frozen)
Working/storage humidity ≤90%RH (no condensation)
Environment
IP rating IP20
Altitude Below 1000m
2
≤5.88m/s
, 10–60Hz (not allowing work at the resonance
Vibration
point)
-5-