INVT DA180-S2R8SG0 Operation Manual page 15

DA180 series basic AC servo drive
No.
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Remarks:
(1)
: For a model without standing inventory, the lead time is longer than usual.
(2)
: When an electromagnetic brake motor is used, since the electromagnetic brake will have
backlash, there will be a small clearance (less than Φ 0.5° ) in the rotating direction if the motor
brake is closed. Pay attention to this in vertical shaft application scenarios. There is no clearance
when a permanent magnetic brake is used.
(3)
: Leave it empty for the first-time model selection.
Description
Inertial
classification
Base model no.
Rated power
Rated revolutions
per minute
(RPM)
Voltage class
Encoder type
Shaft end
connection
Optional part
Lot no.
L: Small inertia
M: Medium inertia
H: Large inertia
06: 60mm
08: 80mm
13: 130mm
0R2: 200W
0R4: 400W
0R7: 750W
1R0: 1.0kW
(2)
A: 1000rpm
B: 1500rpm
E: 2000rpm
F: 2500rpm
G: 3000rpm
2: 220VAC
9: 23-bit multiturn absolute
S: 17-bit single-turn absolute
A: Solid with threaded hole and key (standard)
(1)
B: Solid optical axis
0: With oil seal but no brake
1: Without oil seal or brake
2: With oil seal and permanent magnet brake
3: Without oil seal but with permanent magnet
(1)
brake
4: With oil seal and electromagnetic brake
5: Without oil seal but with electromagnetic brake
Manufacturer lot number
-9-
Example
(1)
(1)
(3)
Overview
(2)