INVT DA180-S2R8SG0 Operation Manual page 77

DA180 series basic AC servo drive
5.2.5.4 Program jogging
After the run parameters P5.00–P5.05 are set, you can press MODE to switch to the auxiliary function
mode. Then you can press UP/DOWN to enter the
program jogging screen, displaying
and
you can press UP or DOWN to start program jogging. The use of the UP or DOWN key is associated
with P5.00. If the motor running direction is counterclockwise, the UP key must be used for the
starting. If the motor running direction is clockwise, the Down key must be used for the starting. After
the starting, the current rotation speed of the motor is displayed.
5.2.5.5 Inertia identifying
You can press MODE to switch to the auxiliary function mode. You can press UP/DOWN to enter the
menu and press SET to enter the inertia identifying menu, which displays
Then you can press SET to enable inertia identifying. After inertia identifying is complete, the result
data such as
screen returns to the parameter setting menu automatically after displaying
seconds.
SET MODE
SET
to enable and disable program jogging. On the
SET
SHIFT
UP
SHIFT
is displayed about three seconds and then saved automatically. The
MODE
menu and press SET to enter the
. Then you can press SHIFT to switch between
MODE
SHIFT
MODE
DOWN
MODE
-71-
Operating and running
screen,
about two
.