Link Aggregation Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
About This Chapter
This chapter describes the concepts, configuration procedures, and configuration examples of
link aggregation.
2.1 Introduction to Link Aggregation
This section describes the concept of link aggregation.
2.2 Link Aggregation Supported by the S9300
This section describes link aggregation features supported by the S9300.
2.3 Configuring Link Aggregation in Manual Load Balancing Mode
This section describes how to configure link aggregation in manual load balancing mode.
2.4 Configuring Enhanced Link Aggregation in Manual Load Balancing Mode
This section describes how to configure enhanced link aggregation in manual load balancing
mode.
2.5 Configuring Link Aggregation in Static LACP Mode
This section describes how to configure link aggregation in static LACP mode.
2.6 Maintaining Link Aggregation
This section describes how to clear the statistics of received and sent LACP packets, debug the
link aggregation group, and monitor the running status of the link aggregation group.
2.7 Configuration Examples
This section provides several configuration examples of link aggregation in manual load
balancing mode and in static LACP mode.
Issue 03 (2009-08-20)
2

Link Aggregation Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Link Aggregation Configuration
2-1