Checking The Configuration; Configuring Ftp Acl; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
The FTP service type is configured.
Step 5 Run:
local-user user-name ftp-directory directory
The authorization directory about the FTP user is configured.
----End

8.2.7 Checking the Configuration

After configuring a switch to be the FTP server, you can view the configuration and status of
the FTP server as well as information about login FTP users.
Prerequisite
The configuration of the Switch to be the FTP Server are complete.
Procedure
l
l
----End
Example
After configuring the FTP server, run the display [ ipv6 ] ftp-server command. You can view
that the parameters of the current FTP server.
<Quidway> display ftp-server
Run the display ftp-users command to view the user name, port number, authorization directory
of the FTP user configured presently.
<Quidway> display ftp-users
username
zll

8.3 Configuring FTP ACL

You can configure the FTP ACL on a switch to allow only specified users to log in to the
switch.

8.3.1 Establishing the Configuration Task

Before configuring the FTP ACL, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Issue 01 (2011-07-15)
Run the display [ ipv6 ] ftp-server the configuration and running information about the
FTP server.
Run the display ftp-users command to check the login FTP user.
FTP server is running
Max user number
User count
Timeout value(in minute)
Listening Port
Acl number
host
100.2.150.226
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
0
30
1080
0
8 FTP and TFTP
port idle topdir
1383 3 flash:
95