Top Reload Registers (Top0Rl-Top10Rl) - Renesas M32R/ECU Series User Manual

10
10.3.6 TOP Reload Registers (TOP0RL–TOP10RL)
TOP0 Reload Register (TOP0RL)
TOP1 Reload Register (TOP1RL)
TOP2 Reload Register (TOP2RL)
TOP3 Reload Register (TOP3RL)
TOP4 Reload Register (TOP4RL)
TOP5 Reload Register (TOP5RL)
TOP6 Reload Register (TOP6RL)
TOP7 Reload Register (TOP7RL)
TOP8 Reload Register (TOP8RL)
TOP9 Reload Register (TOP9RL)
TOP10 Reload Register (TOP10RL)
b0 1 2
? ? ?
b Bit Name
0–15 TOP0RL–TOP10RL
Note: • This register must always be accessed in halfwords.
The TOP reload registers are used to load data into the TOP counter registers (TOP0CT–TOP10CT). The
content of the reload register is loaded into the counter in the following cases:
• When the counter is enabled in single-shot output mode
• When the counter underflowed in delayed single-shot or continuous output mode
Simply because data is written to the reload register does not mean that the data is loaded into the counter. The
counter is loaded with data in only the above cases.
Note that reloading of data after an underflow is performed synchronously with a clock pulse at which the
counter underflowed.
3 4 5 6
TOP0RL–TOP10RL
? ? ? ?
MULTIJUNCTION TIMERS
10.3 TOP (Output-Related 16-Bit Timer)
7 8 9 10
? ? ? ?
Function
16-bit reload register value
10-76
<Address: H'0080 0242>
<Address: H'0080 0252>
<Address: H'0080 0262>
<Address: H'0080 0272>
<Address: H'0080 0282>
<Address: H'0080 0292>
<Address: H'0080 02A2>
<Address: H'0080 02B2>
<Address: H'0080 02C2>
<Address: H'0080 02D2>
<Address: H'0080 02E2>
11 12 13 14
? ? ? ?
<After reset: Undefined>
32180 Group User's Manual (Rev.1.0)
b15
?
R W
R W