Converter board for connecting 100-pin rfs type emulator mcu to 64-pin 0.8-mm-pitch qfp/lqfp (for 38000 series 38c1, 38c2, 38k0 and 38k2 groups) (6 pages)
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
1. Outline The M32182T2-PTC is a converter for featuring the debugging function such as real-time tracing when using emulators M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E with the M32182F3xFP. 2. Package Components (1) M32182T2-PTC converter (2) YQPACK144SD (made by Tokyo Eletech Corporation) (3) NQPACK144SD (made by Tokyo Eletech Corporation)
5. Connection Procedure The procedure for connecting the M32182T2-PTC is shown according to applications. See Figures 2 to 4. 5.1 For the M32100T2-SDI-E (1) Mount the NQPACK144SD. (2) Mount the YQPACK144SD on the NQPACK144SD. (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE's.
Page 6
(3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE's. (4) Set the clock select switch. (5) Mount the M32182T2-PTC on the YQPACK144SD. (6) Mount the M3T-PTC-CNV on the M32182T2-PTC. (7) Connect the probe of the emulation pod and the M32182T2-PTC via the SDI MCU control interface cable and the SDI trace interface cable.
Page 7
(2) Mount the M32182F3xFP on the NQPACK144SD. (3) Mount the HQPACK144SD on the NQPACK144SD. 6. Selecting a Clock With the M32182T2-PTC, it is possible to select a clock supply to the MCU by the clock select switch (SW1). Select a clock supply as shown below.
Page 8
7. External Dimensions and a Sample Foot Pattern of the M32182T2-PTC Unit: mm Figure 6 External dimensions and a sample foot pattern of the M32182T2-PTC ( 6 / 7 )
• For purchasing the NQPACK144SD, YQPACK144SD and HQPACK144SD, contact the following: Daimaru Kogyo Ltd. http://www.daimarukogyo.co.jp/index_e.htm Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tool Homepage http://www.renesas.com/en/tools ( 7 / 7 )