Renesas M32R/ECU Series User Manual page 416

10
• Example of correct settings
• Cases where settings have no effect
(1)
(2)
Figure 10.8.7 PWMOFFnS Setting Procedure
PWMOFFnSP "1"
PWMOFFnSP "0"
PWMOFFnS Set value
PWMOFFnSP "1"
Write to other area
PWMOFFnSP "0"
PWMOFFnS Set value
PWMOFFnSP "1"
PWMOFFnSP "1"
PWMOFFnS "0"
PWMOFFnS Set value
MULTIJUNCTION TIMERS
10.8 TOU (Output-Related 24-Bit Timer)
If a write cycle to any other area occurs
during this interval, the value that was
set in the PWMOFFnS bits is not reflected.
Because a write cycle to other area exists,
the set value is not reflected.
Because these two consecutive writes comprise
a pair, the next set value is not reflected.
10-173
32180 Group User's Manual (Rev.1.0)