Renesas M32R/ECU Series User Manual page 28

1
Table 1.3.1 Description of Pin Functions (3/5)
Type Pin Name
A-D converter AVCC0,
AVCC1
AVSS0,
AVSS1
AD0IN0
–AD0IN15
AD1IN0
–AD1IN15
VREF0,
VREF1
Interrupt SBI#
controller
Serial I/O SCLKI0/
SCLKO0
SCLKI1/
SCLKO1
SCLKI4/
SCLKO4
SCLKI5/
SCLKO5
Signal Name Input/Output Description
Analog power supply –
Analog ground –
Analog input Input
Analog input Input
Reference voltage Input
input
System break Input
interrupt
UART transmit/receive Input/output When channel 0 is in UART mode:
clock output or CSIO
transmit/receive clock
input/output
UART transmit/receive Input/output When channel 1 is in UART mode:
clock output or CSIO
transmit/receive clock
input/output
UART transmit/receive Input/output When channel 4 is in UART mode:
clock output or CSIO
transmit/receive clock
input/output
UART transmit/receive Input/output When channel 5 is in UART mode:
clock output or CSIO
transmit/receive clock
input/output
AVCC0 and AVCC1 are the power supply for the A-D0 and
the A-D1 converter, respectively. Connect AVCC0 and AVCC1
to the power supply rail.
AVSS0 and AVSS1 are the analog ground for the A-D0 and
the A-D1 converter, respectively. Connect AVSS0 and AVSS1
to ground.
16-channel analog input pins for the A-D0 converter, i.e.,
the first block A-D converter.
16-channel analog input pins for the A-D1 converter, i.e.,
the second block A-D converter.
VREF0 and VREF1 are the reference voltage input pin for
the A-D0 and the A-D1 converter, respectively.
This is the system break interrupt (SBI) input pin for the
interrupt controller.
This pin outputs a clock derived from BRG output by
dividing it by 2.
When channel 0 is in CSIO mode:
This pin accepts as input a transmit/receive clock when
external clock is selected or outputs a transmit/receive
clock when internal clock is selected.
This pin outputs a clock derived from BRG output by
dividing it by 2.
When channel 1 is in CSIO mode:
This pin accepts as input a transmit/receive clock when
external clock is selected or outputs a transmit/receive
clock when internal clock is selected.
This pin outputs a clock derived from BRG output by
dividing it by 2.
When channel 4 is in CSIO mode:
This pin accepts as input a transmit/receive clock when
external clock is selected or outputs a transmit/receive
clock when internal clock is selected.
This pin outputs a clock derived from BRG output by
dividing it by 2.
When channel 5 is in CSIO mode:
This pin accepts as input a transmit/receive clock when
external clock is selected or outputs a transmit/receive
clock when internal clock is selected.
1-11
OVERVIEW
1.3 Pin Functions
32180 Group User's Manual (Rev.1.0)