21
Symbol
VIL
Input Low
Voltage
(Note 4)
IOH(peak) High State Peak Output Current P0–P22 (Note 2)
IOH(avg)
High State Average Output Current P0–P22 (Note 3)
IOL(peak) Low State Peak Output Current P0–P22 (Note 2)
IOL(avg)
Low State Average Output Current P0–P22 (Note 3)
CL
Output Load JTDO, JTMS
Capacitance Other than above
f(XIN)
External Clock Input Frequency
Note 1: Subject to conditions VCCE ≥ AVCC ≥VREF, VCCE = OSC-VCC
Note 2: Make sure the total output current (peak) of ports is
| ports P0 + P1 | ≤ 80 mA
| ports P2 + P3 | ≤ 80 mA
| ports P41–P43 + P70–P73 | ≤ 80 mA
| ports P44–P47 + P224–P227 | ≤ 80 mA
| ports P61–P63 + P12 + P14 + P19 | ≤ 80 mA
| ports P65–P67 + P8 + P16 + P17 + P21 | ≤ 80 mA
| ports P74–P77 + P10 + P18 | ≤ 80 mA
| ports P9 + P11 | ≤ 80 mA
| ports P13 + P220–P223 | ≤ 80 mA
| ports P15 + P20 | ≤ 80 mA
Note 3: The average output current is a value averaged during a 100 ms period.
Note 4: The ports listed below operate with the VCC-BUS power supply, and not with the VCCE power supply. Therefore, the
reference voltage for these ports is the VCC-BUS input voltage.
P00–P07, P10–P17, P20–P27, P30–P37, P41–P47, P70–P73, P224–P227
21.4 Electrical Characteristics when VCCE = 3.3 V, f(XIN) = 10 MHz
Parameter
FP, MOD0, 1, JTMS, JTRST, JTDI, RESET
Standard input for the following pins:
RTDCLK, RTDRXD, SCLKI0, 1, 4, 5, RXD0–5,
TCLK0–3, TIN0–33, CRX0, 1
Standard input for the following pins: DB0–15, WAIT
Standard input for the followingpins: SBI, HREQ
ELECTRICAL CHARACTERISTICS
MIN
0
0
0
0
5
21-12
Rated Value
TYP
MAX
0.2VCCE
0.2VCCE
0.2VCCE
0.2VCCE
-10
-5
10
5
80
50
10
32180 Group User's Manual (Rev.1.0)
Unit
V
V
V
V
mA
mA
mA
mA
pF
pF
MHz