Tid Control & Prescaler Enable Registers - Renesas M32R/ECU Series User Manual

10
10.7.3 TID Control & Prescaler Enable Registers
TID0 Control & Prescaler 3 Enable Register
b8 9 10
TID0M TID0CEN
0 0 0
b Bit Name
8–10 TID0M
TID0 operation mode select bit
11 TID0CEN
TID0 count enable bit
12–14 TOU0ENS
TOU0 enable source select bit
15 PRS3EN
Prescaler 3 enable bit
Note: • Operation mode can only be set or changed while the counter is inactive.
The TID0 Control & Prescaler 3 Enable Register is used to select TID0 operation mode (Fixed period count,
Event count, Multiply-by-4 event count or Up/down event count mode), as well as select TOU0_0–7 timer enable
sources and control prescaler 3 startup.
11 12 13 14
TOU0ENS PRS3EN
0 0 0 0
10.7 TID (Input-Related 16-Bit Timer)
(TID0PRS3EN) <Address: H'0080 07D1>
b15
0
Function
000: Fixed period count mode
001: – ditto–
010: Multiply-by-4 event count mode
011: Event count mode
100: Fixed period count mode
101: – ditto –
110: Multiply-by-4 event count mode
111: Up/down event count mode
0: Stop TID0 count
1: Start TID0 count
000: Disable event enable
001: – ditto –
010: TID0 underflow/overflow
011: TOU0_7 underflow
100: Disable event enable
101: – ditto –
110: Output event bus 0
111: External input TIN25 signal
0: Stop count
1: Start count
10-141
MULTIJUNCTION TIMERS
<After reset: H'00>
32180 Group User's Manual (Rev.1.0)
R W
R W
R W
R W
R W