Renesas M32R/ECU Series User Manual page 257

10
Table 10.2.4 Timing at Which Signals are Generated to the Output Event Bus by Each Timer
Timer Mode
TOP Single-shot output mode
Delayed single-shot output mode
Continuous output mode
TIO(Note 1) Measure clear input mode
Measure free-run input mode
Noise processing input mode
PWM output mode
Single-shot output mode
Delayed single-shot output mode
Continuous output mode
TMS (16-bit measure input)
TML (32-bit measure input)
TID Fixed period mode
Event count mode
Multiply-by-4 event count mode
Up/down event count mode
TOU PWM output mode
Single-shot PWM mode
Delayed single-shot output mode
Single-shot output mode
Continuous output mode
Note 1: TIO5–7 output an underflow signal to the input event bus.
MULTIJUNCTION TIMERS
10.2 Common Units of Multijunction Timers
Timing at which signals are generated to the output event bus
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
When the counter underflows
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
No signals generated
10-14
32180 Group User's Manual (Rev.1.0)