Renesas M32R/ECU Series User Manual page 419

10
• Example of correct settings
POnDIS
• Cases where settings have no effect
(1)
POnDIS
(2)
POnDIS
Figure 10.8.8 POnDIS Setting Procedure
POnDISP "1"
POnDISP "0"
Set value
POnDISP "1"
Write to other area
POnDISP "0"
Set value
POnDISP "1"
POnDISP "1"
POnDISP "0"
Set value
MULTIJUNCTION TIMERS
10.8 TOU (Output-Related 24-Bit Timer)
If a write cycle to any other area occurs during
this interval, the value that was set in the POnDIS
bit is not reflected.
Because a write cycle to other area exists,
the set value is not reflected.
Because these two consecutive writes comprise a pair,
the next set value is not reflected.
10-176
32180 Group User's Manual (Rev.1.0)