Enabling The Output Of Debugging Information - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
channel number: 8, channel name: channel8
MODU_ID
ffff0000 default
channel number: 9, channel name: channel9
MODU_ID
ffff0000 default
Run the display info-center command to show the data recorded by info-center.
<Huawei> display info-center
Information Center: enabled
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Logfile:
Information timestamp setting:
Sent messages = 25, Received messages = 25
Run the display trapbuffer command. If alarms in the alarm buffer are displayed, it means that
the configuration is successful.
<Huawei> display trapbuffer
Trapping buffer configuration and contents: enabled
Allowed max buffer size: 1024
Actual buffer size: 256
Channel number: 3, Channel name: trapbuffer
Dropped messages: 0
Overwritten messages: 713
Current messages: 1
#Aug 23 2007 18:47:19+00:00 AR200-V2R2C00-161 SECE/4/ARP_SIP_SPEEDLIMIT_ALARM:OI
D=1.3.6.1.4.1.2011.5.25.165.2.2.2.11 The arp packet speed with source ip 10.137.
216.1 exceed the speed-limit value configed 5.

2.5 Enabling the Output of Debugging Information

This section describes how to configure a specific module to output debugging information to
log files, consoles, terminals, or SNMP agents.
Issue 03 (2011-11-27)
NAME ENABLE LOG_LEVEL
Y debugging
NAME ENABLE LOG_LEVEL
Y debugging
channel number: 0, channel name: console
channel number: 1, channel name: monitor
channel number: 5, channel name: snmpagent
enabled
max buffer size: 1024, current buffer size: 512
current messages: 6, channel number: 4, channel name: logbuffer
dropped messages: 0, overwritten messages: 0
enabled
max buffer size: 1024, current buffer size: 256
current messages: 0, channel number: 3, channel name: trapbuffer
dropped messages: 0, overwritten messages: 0
channel number: 9, channel name: channel9, language: English
log - date, trap - date, debug - date
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
ENABLE TRAP_LEVEL
Y debugging
ENABLE TRAP_LEVEL
Y debugging
ENABLE DEBUG_LEVEL
N debugging
ENABLE DEBUG_LEVEL
N debugging
30