Type-3: Hdd Data Encryption Kit/ Removable Hdd Kit; Points To Note When Unpacking Hdd Data Encryption; Installation Procedure; Points To Note At Installation - Canon imageRUNNER ADVANCE C3325 Series Service Manual

TYPE-3: HDD Data Encryption Kit/ Removable HDD
Kit Installation Procedure

Points to Note at Installation

CAUTION:
• When handling the HDD, be careful not to vibrate or drop it.
• Be sure to prepare a USB memory for upgrading created with SST.
• If only the HDD Data Encryption Kit is installed, the data on the HDD will be erased.
Be sure to back up/export the data as necessary.
CAUTION: Marked portion
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of
damage and deformation of screw holes.

Points to Note when Unpacking HDD Data Encryption

& Mirroring Kit
CAUTION:
A security sticker is attached to the kit package to indicate that the package has not
been opened. Check to see that the package has not been opened in any way and the
sticker is not torn. If the package appears to have been opened or the sticker is torn,
check to make sure that the user has done so intentionally.
9
Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Checking the Contents > HDD Data Encryption Kit
F-9-313
9 Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Checking the Contents > HDD Data Encryption Kit

Checking the Contents

■ HDD Data Encryption Kit
[1] Encryption Board X 1
[2] Cable Guide X 1
[4] Signal Cable
[5] Power Cable
(250mm; A:HDD-Sig)
(270mm; A:HDD-Pow1)
X 1
X 1
[7] Power Cable
[8] Cable Guide X 1
(135mm; A:Cont-Pow)
X 1
<Others>
Including guides
9-132
[3] Screw (TP; M3x6) X 4
[6] Signal Cable
(135mm; A:Cont-Sig)
X 1
[9] Wire Saddle X 3
F-9-314
9-132