Communication Interface Setting (Communication Setting); Standard I/F; Standard I/F Functions; Communication Interface Setting - Mitsubishi Electric GOT2000 Series User Manual

11. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)

The following communication interface setting can be configured.
Item

Standard I/F

GOT IP Address
Ethernet communication
Comm.Monitor
Communication
setting
Ethernet check
Transparent mode
Keyword
*1 Only available to Ethernet models.
11.1 Standard I/F
11.1.1

Standard I/F functions

Function
Channel no. display
Communication driver display
Communication parameters display
Assigning channel number and communication driver to
communication interface
*1
Configuring GOT Ethernet setting
*1
Displaying the contents of Ethernet setting, changing the host
Checking the serial communication port communication
*1
Checking the Ethernet communication port communication
Setting the channel No. to be used for the communication for the FA
transparent function
Setting or deleting sequence program protection key words and
canceling sequence program protection status for the FXCPU
connection
Description
Displays the channel number (CH No) that has been assigned by drawing software
Displays the communication driver that has been assigned by drawing software
Displays the communication parameters of the controllers that has been assigned by drawing
software
Function overview
11.1 Standard I/F
Reference
➠
11.1
➠
11.2
➠
11.3
➠
11.4
➠
11.5
➠
11.6
➠
11.7
11
11 - 1