Username - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.1 System
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system name <system name>
The parameter has the following meaning:
Parameter
system name
Result
The name is created in the system.
3.1.9.13

username

Description
With this command, you change the password of the factory set default user "admin".
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
username {admin} password <passwd>
74
Description
Input box for the name
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
max. 255 characters
Configuration Manual, 07/2017, C79000-G8976-C361-06