2 Installation and commissioning
2.3.9. Installation of Chip protection - IRB 6660 - 205/1.9
2.3.9. Installation of Chip protection - IRB 6660 - 205/1.9
NOTE!
This section is not applicable to the robot variant IRB 6660-130/3.1.
Location of Chip protection
The chip protection is installed on the lower arm as shown in the figure below.
xx0700000630
A
B
C
D
Required equipment
Equipment
Chip protection
Locking liquid
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
70
Bracket
Attachment screws M6x16 quality 8.8-A2F (2 pcs per side)
Attachment screws M6x16 quality 8.8-A2F (4 pcs)
Protection
Art. no.
3HAC030124-001
-
Note
Loctite 243
For locking screws.
The content is defined in
section
Standard toolkit on
page
280.
These procedures include
references to the tools
required.
Continues on next page
3HAC028197-001 Revision: A