Table of Contents
Advertisement
2 Installation and commissioning
2.3.10. Installation of cooling fan for motors, axis 1 or 2 (option)
Continued
Equipment
Locking liquid
Standard toolkit
Circuit diagram
Other tools and procedures
may be required. See
references to these
procedures in the step-by-
step instructions below.
Plate for customer connections, at base
xx0500002301
A
B
Installation, fan
The procedure below details how to install the cooling fan on motors, axes 1 or 2 .
1.
74
Plate for customer connections
Attachment screws, 3 pcs, M6x16 quality 8.8-A2F
Action
DANGER!
Turn off all electric power, hydraulic and pneumatic pressure
supplies to the robot!
Art. no.
Note
-
Loctite 243. Used for the three tightening
screws.
-
The content is defined in section
Standard toolkit on page
3HAC025744-001
See chapter
These procedures include references to
the tools required.
280.
Circuit
diagram.
Note
Continues on next page
3HAC028197-001 Revision: A
Advertisement
Table of Contents
