Engine Oil Sample Point; Engine Fuel System - JLG sky trak mmv Service Manual

2.13.6

Engine Oil Sample Point

1. Open the engine cover.
2. Locate the oil sample valve (6) on the side of the
engine.
3. After oil sample has been taken, close the engine
cover.
6
Model MMV Rev. 12/04
General Information, Specifications and Maintenance
2.13.7
a. Drain Water from Fuel-Water Separator/Filter
5
10
1. Level the vehicle, ground the attachment, place the
travel select lever in the [N] NEUTRAL position, place
the neutral lock lever in the [N] NEUTRAL LOCK
MM4570
position, engage the parking brake switch and shut
the engine OFF. Allow the engine to cool.
2. Place an Accident Prevention Tag on both the
ignition switch and steering wheel, stating that the
vehicle should not be operated. (Refer to Section
1.5, Accident Prevention Tag Usage .)
3. Open the engine compartment cover.
4. Position a suitable glass container beneath the fuel
filter drain cock (7), located on the underside of the
fuel filter (8).
5. Loosen the fuel filter drain cock. Allow the water to
drain into the glass container until clear fuel is
visible. After draining is complete, tighten the drain
cock. Dispose of drainage properly.
6. Close the engine compartment cover.
OM1321

Engine Fuel System

H 0
2
MS21402 OS0851
8
7
MM3240
2.37