Fluids, Lubricants And Capacities; Axles (Differential Housings) And Transfer Case; Wheel Ends - JLG sky trak mmv Service Manual

General Information, Specifications and Maintenance
2.6 FLUIDS, LUBRICANTS AND
CAPACITIES
2.6.1 Axles (Differential Housings) and
Transfer Case
a. Axle and Transfer Case Lubricants
Recommended Oil/Temperature Range
MIL-PRF-2104G Grade 10W30
(Universal Tractor Fluid*)
100° F (38° C)
*John Deere (JDM J20C Hy-Gard)
*Ford/New Holland ESN-M2C134-D (Hydraulic Oil 134)
*Massey Ferguson M-1141 (Permatran lll)
*Chevron 1000 THF
In general, use a oil that meets the following specifica-
tions:
Nominal viscosity at 104° F (40° C)....................... 55 cSt
Minimum viscosity at 212° F (100° C) .................. 9.1 cSt
Pour point (Maximum) ..............................-32° F (-36° C)
Flash point (Minimum) ............................ 392° F (200° C)
Minimum viscosity index............................................ 135
b. Axle and Transfer Case Capacities
Axles (differential housings) .............. 10.5 qt (10,0 liters)
Transfer case......................................... 1.5 qt (1,4 liters)
2.20
MIL-PRF-2104G Grade 15W40
OM1680
2.6.2

Wheel Ends

a. Wheel-End Lubricants
Recommended Oil/Temperature Range
MIL-PRF-2104G Grade 10W30
(Universal Tractor Fluid*)
100° F (38° C)
*John Deere (JDM J20C Hy-Gard)
*Ford/New Holland ESN-M2C134-D (Hydraulic Oil 134)
*Massey Ferguson M-1141 (Permatran lll)
*Chevron 1000 THF
In general, use a oil that meets the following specifica-
tions:
Nominal viscosity at 104° F (40° C) ...................... 55 cSt
Minimum viscosity at 212° F (10° C) .................... 9.1 cSt
Pour point (Maximum).............................. -32° F (-36° C)
Flash point (Minimum).............................392° F (200° C)
Minimum viscosity index ............................................135
DO NOT add additional friction modifier to factory-filled
wheel ends. All wheel ends are factory-filled by the man-
ufacturer with oil. If a wheel end is drained for service, it
should be refilled with the gear oils listed.
Note: DO NOT use synthetic oil without the express
written consent of the manufacturer.
b. Wheel-End Capacity
Wheel ends ....................... 1.3 qt (41.6 fl oz, or 1,2 liters)
MIL-PRF-2104G Grade 15W40
OM1680
Model MMV Rev. 12/04