JLG sky trak mmv Service Manual page 608

Electrical System
13. With the ignition switch (1) in the RUN position (2)
press the rear wiper switch (4) to the ON position
and then to the OFF position to "Park" the rear wiper
motor on the right side of the rear window. Turn the
ignition switch back to the OFF position (3).
2
4
14. Assemble the rear wiper arm (5) to the rear wiper
motor shaft (6) with the wiper blade on the right side
of the rear window. The wiper blade should be
parallel to the edge of the window. Push the wiper
arm all the way onto the motor shaft.
15. Assemble the washer hose (7) onto the hose
connection on the hose fitting (8).
10.128
1
3
MM4760
Front
MM4420
Front
16. Turn ignition switch (1) to the RUN position (2) and
turn rear wiper switch (4) to the ON position. Ensure
wiper stays on the window through a full stroke.
17. Press and hold the bottom of the skylight wiper/
washer & rear window washer switch (9) to ensure
fluid is sprayed on the roof and rear windows.
18. Position the skylight wiper/washer & rear window
washer switch (9) in the center position to allow the
roof wiper to clear fluid from the skylight window.
19. Press the skylight of the skylight wiper/washer & rear
window washer switch (9) to turn the roof wiper off.
20. Turn the rear wiper switch (4) to the OFF position.
21. Turn the ignition switch (1) to the OFF (3) position.
8
7
5
6
MM4370
9
OM0810
Model MMV Rev. 12-04